PTC components have high requirements for dispensing accuracy, because the product is coated with small lines, so the machine produced by the manufacturer should have good and high-precision dispensing technology, which is the core dispensing requirements, and fundamentally solve the dispensing problem. According to the arrangement of each product, our company will manufacture a suitable dispensing machine, and we will arrange desktop dispensing machine for dispensing Glue, precision can reach 0.01mm The repeated dispensing accuracy can reach ± 0.025mm The dispensing effect meets the requirements.

　　Before dispensing, each product will be required to send samples and glue for proofing and testing, and send the production speed and effect to the manufacturer. Only when they think it is appropriate, can they arrange the production of machines. Our company basically has no machines to return, and the quality is very stable, and there is basically no after-sales service. In the early stage, our company will teach how to use and maintain a full-automatic point The rubber machine has been in use for four or five years. There are some consumables that need to be replaced in two or three months. There are basically no other problems.

 

　　Constant control system, full-time system and PLC system are used in the dispensing machine of our company. The cost of using PLC will be higher. This system is generally used in large-scale machines. The desktop type generally adopts constant control dispensing system. The operation interface is very simple. When the mobile machine does the fixed point and height, the dispensing programming is completed. The operation is very simple.

　　In addition to the dispensing of PTC components, the main board of the frequency converter is also applied with heat-conducting silica gel, which is matched with silica gel sleeve to store glue, and then the product glue control is carried out, which directly solves the glue dispensing problem. According to the core requirements of the product, a reasonable machine is configured to fundamentally solve the dispensing problem. Our company has a large number of dispensing equipment for your choice! The right machine can bring you great profit value.

 

　　PTC component dispensing and frequency converter main board gluing adopt the same technology, and the same set of silica gel sleeve is used, the same machine type solves various product problems, and the technology is basically the same. Our company adopts a stone horse dispensing machine made by a lot of core equipment, which can be applied to a variety of products, and the dispensing efficiency of PTC components is also good! Welcome to contact us at 13662812001.