There are many operation schemes for headphone dispensing. It can be seen that according to the different characteristics of the production scheme, there will be targeted operation. The dispensing equipment application and the manufacturer's operation requirements are combined to get a set of operation scheme. Our company has the technology of manufacturing non-standard machines to avoid unnecessary too long operation, so as to lead to longer production time.

　　First of all, we need to know which glue, dispensing position, width requirements, dispensing speed, glue quantity requirements, etc. are needed for earphone dispensing and sealing. All the above parameters are given to the manufacturer. Then, our company will manufacture an appropriate automatic dispenser according to the requirements, which can meet the dispensing requirements in all aspects and control the production cost. We recommend a full-automatic syringe dispensing machine, with performance, speed and cost This control is in the most appropriate range.

　

　　1. The daily production of earphones is large and the amount of glue used is small. It needs to be coated with a layer of glue. It does not need to be matched with piston pressure barrel and dispensing valve. The cost of using dispensing syringe is the lowest. Only one syringe needs to be used every day and the product does not need to be cleaned to avoid waste of time.　

　　2. Using the syringe to control glue can prevent glue leakage and wire drawing. Although the syringe is simple, the effect is good and the uniformity of glue application is well controlled.

　　3. Circular arc dispensing technology, while in ear type or headwear type is still suitable for use, both of which are used in gluing technology.

　　4. The cost of the pin barrel dispensing machine is low, and the price is lower than that of the machine with piston pressure barrel and dispensing valve.

　　5. The uniformity of glue application is the operator's performance of machine proficiency, and the entry is the better operation of the syringe dispenser.

　　Earphone dispensing uses the automatic dispensing machine produced by our company to meet the production demand. Your company has the demand, you can understand it! After all, each manufacturer has its own production technology, and the way will be different. It is also good for us to know more manufacturers. Our company has been very long in the production industry of automatic dispensing machine, and the technology of glue uniformity and circular arc dispensing is mature.

　　There are also automatic dispensers equipped with piston pressure barrels, visual spray glue applicators and customized automatic production lines. However, the production cost of the production line is relatively high, but our company can still do it. If you need, you can consult our manufacturer and contact information is available! Please call the service hotline.