Cost saving of maintenance of automatic dispensing machine
作者:馬交易???日期:2019-12-30 17:22???瀏覽:
Why to say to spend manpower to maintain, can save production cost? Machines are the same as people. People need to clean themselves. After the machines are used, they also need to be cleaned. The service life of the products can be lengthened, which definitely saves a lot of costs. For example, the dispensing valve equipped with the anaerobic dispensing machine has a price of 550 yuan / piece, and the cost is high. The maintenance of the full-automatic dispensing machine really saves the production cost.
How to maintain the automatic dispensing machine?
1. After daily use, clean the glue pipe and discharge all the excess glue to prevent the glue from solidifying inside the pipe and blocking operation.
2. The dispensing valve shall be cleaned and maintained, and the glue shall be removed from the rubber cylinder, cleaned with alcohol, and then dried.
3. The dust on the support surface of the automatic dispenser should be cleaned to avoid affecting the dispensing effect.
4. Lubrication of mechanical shaft, long-time high-speed movement of mechanical shaft, good consumption of internal lubricating oil, reduce friction error, reduce the life of guide rail.
5. Check the small parts of the automatic dispenser regularly, and some fixed parts need to be checked to avoid air leakage.
The above are the things that need to be done for the maintenance of the automatic dispensing machine. If the maintenance work is done well every day, the service life of the machine will increase, and the dispensing problems will be very few, which will not affect the gluing effect. This is more temperature for the use of the machine. For example, if the anaerobic dispensing machine is used for gluing the CD box, and the anaerobic dispensing valve is used, the glue will not solidify inside the dispensing valve, and it will also In case of solidification, cleaning can protect the internal parts, so as to avoid problems, resulting in uneven coating or overflow of CD box, which are all bad.
Anaerobic glue dispenser is only one of ten million ways to apply glue to CD case. In order to solve the existing glue application problem, the production effect can be guaranteed according to the maintenance of automatic glue dispenser. The maintenance is very important for the use of the machine.
